Standard 1800 Series Underbar Sink Unit, 4-compartment, 72"W x 18-1/2"D x 34"H, stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 12" reinforced drainboards on left & right, 3-1/2"H backsplash, 4" O.C. splash mount faucet, stainless steel clad over galvanized steel apron on front & sides, galvanized steel rear & bottom, includes 1" drain & removable overflow standpipe, galvanized steel legs with adjustable grey plastic bullet feet, NSF

Standard 1800 Series Underbar Sink Unit, 3-compartment, 60"W x 18-1/2"D x 34"H, stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 12" reinforced drainboards on left & right, 3-1/2"H backsplash, 4" O.C. splash mount faucet, stainless steel clad over galvanized steel apron on front & sides, galvanized steel rear & bottom, includes 1" drain & removable overflow standpipe, galvanized steel legs with adjustable grey plastic bullet feet, NSF

EasyInstall Pre-Rinse Unit, spring action gooseneck, single hole base faucet, 18" flex. stainless steel supply lines with comp. fittings for 5/8" OD copper tubing, 45"H, 14" overhang, 19-3/8" clearance, 24" riser, spray valve, stainless steel hose

Hand Sink, wall mount, 16"W x 15"D x 29"H O.A., 20 gauge stainless steel construction, 14" wide x 10" front-to-back x 6" deep bowl, 8"H backsplash, splash mount faucet on 4" centers with 6" swing spout, soap & towel dispenser, stainless steel side support brackets, 1-1/2" drain with P-trap, mounting bracket included, NSF

Krowne Royal Series Pre-Rinse Assembly with Wall Bracket, Wall-Mounted, 8" Centers, Spring Action Flexible Gooseneck, 38" High with 15" Overhang, Add-On Faucet with 12" Spout, 1/2" NPT Female Inlets, 1.2GPM spray head, 2.0GPM faucet spout, chrome plated brass base, built in check valves, wall bracket & mounting kit included, NSF, CSA, Low Lead Compliant, interchangeable with T&S Brass & Encore

Standard 1800 Series Underbar Hand Sink, 12"W x 18-1/2"D OA, 4" backsplash, 10" x 14" x 7" deep bowl, 1-1/2" rear corner drain with overflow pipe, faucet, stainless steel top & front, galvanized legs, NSF

Mop Sink, floor mounted, 24-5/8"W x 19-3/8"D x 16"H overall size, 20"W x 16" front-to-back x 12" deep compartment, 3-1/2" diameter drain, marine edge on front & sides, tile edge on rear, 16/300 stainless steel construction

Krowne Royal Series Pre-Rinse Assembly with Wall Bracket, Wall-Mounted, 8" Centers, Spring Action Flexible Gooseneck, 35" High with 15" Overhang, 1/2" NPT Female Inlets, 1.2GPM spray head, chrome plated brass base, built in check valves, wall bracket & mounting kit included, NSF, CSA, Low Lead Compliant, interchangeable with T&S Brass & Encore

Service Sink Faucet, 8" centers, 2-3/8" clearance from wall to center of faucet, 8-7/8" from wall to center of outlet, rough chrome-plated finish, vacuum breaker nozzle with 3/4" garden hose thread & pail hook, built in screwdriver stops

Krowne Royal Series Faucet, splash-mounted, 8" centers, swing spout, 12" long, replaceable cartridge valve assembly, NSF, CSA (Best), low lead compliant

Spray Valve Assembly, with hold down ring & rubber bumper

Flatware Washing Basket, half size, 18" x 7-3/4" x 7-1/4" high, 4-3/4" max. height, 8-compartment, with handles, soft gray, NSF

Krowne Add-On-Faucet, for Pre-Rinse, with 12" Spout, 3/8" NPT male inlet, 3/8" NPT female outlet, Low Lead Compliant (interchangeable with T&S Brass, Encore)

Camrack® Glass Rack,with (4) soft gray extenders, full size, 19-3/4" x 19-3/4" x 10-1/2", (25) compartments, 3-7/16" max. dia., 8-1/2" max. height, soft gray, HACCP compliant, NSF

Camrack® Glass Rack, with (3) soft gray extenders, full size, 19-3/4" x 19-3/4" x 8-7/8", (25) compartments, 3-7/16" max. dia., 6-7/8" max. height, soft gray, HACCP compliant, NSF

Camrack® 5 x 9 Peg Rack, full size, 5 spacing & 9 spacing configuration, will hold 10" deep dish plates or pasta & soup bowls, smooth sides, round corners, ergonomic handles, 2-5/8" max. height, soft gray, NSF

Krowne Commercial Series Faucet, splash-mounted, 8" centers, swing spout, 12" long, low lead compliant

Krowne Commercial Series Faucet, splash-mounted, 8" centers, swing spout, 8" long, low lead compliant

Signature Flatware Soak & Washing Systems, half size, rack only, 10"W x 19-3/4"D x 4-1/8"H, (compartment size 9"W x 18-1/16"D x 2-5/8"H), polypropylene, specify color, NSF, Made in USA

Glass Washer, 9" x 4-1/2" x 8-1/2"H, triple glass brush, rubber suction, solid cast base, Made in USA

Swing Nozzle, 8"

Camrack® Flatware Rack, full size, 19-3/4" x 19-3/4" x 4", 2-5/8" max. height, soft gray, NSF

Camrack® 9 x 9 Peg Rack, full size, 19-3/4" x 19-3/4" x 4", compartment inches 18" x 18", 2-5/8" max. height, soft gray, NSF

Swing Nozzle, 6"

Energy Mizer® Dishwasher, conveyor type, 44"W x 25-1/8"D x 55-1/2"H, right-to-left operation, low temp chemical sanitizing or high temp sanitizing, dual tank design, (3) stage wash process (wash/power rinse/final rinse), (243) racks/hour, 19" dish clearance, electric tank heat, auto start/stop, auto fill, automatic water control system, power rinse heater system, automatic soil purging system, chemical resistant industrial heaters, table limit switch & rack save clutch system, removable curtains, stainless steel construction, includes (1) open & (1) peg rack, 1 HP wash motor, 1/3 HP rinse motor, 1/8 HP conveyor motor, ENERGY STAR®, UL, cULus, ETL

Sink, (3) 16"W x 20" front to back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

E-Series Compartment Sink, (3) 18"W x 24" front-to-back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF

Underbar Sink Unit, 4-compartment, 72"W x 21"D x 32-1/2"H, 18/304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 13" ribbed drainboards on left & right, 4"H backsplash, (2) 4" O.C. deck mount faucet (PBF-4-D-10), raised marine edge on front & sides, stainless steel apron on front & sides, includes 1-1/2" drains & overflow stand pipes (PB-OVF-BS), galvanized steel gussets, galvanized legs & side bracing, adjustable plastic bullet feet, NSF (weights are subject to additional packaging)

Sink, (3) 18"W x 24" front to back x 14"deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF

Sink, (1) 18"W x 24" front to back x 14"deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF